THE HANDYMAN ZONE
"Hammer it Out in the Zone"

• HOME IMPROVEMENT ZONE • APPLIANCE ZONE • CAR ZONE •

 

 

HOMEHOW-TO PAGESBOOK STORELittle Giant LaddersFREE STUFF10% off purchase of off ALL major appliances $299 LINK TO US

HUNGRY? TRY PlusRecipes.com

Custom Search

 

Share |

             

 
Hey, you're in the power supply zone--YOUR HANDYMAN ZONE!

 

Power Supply 1-2-3: Direct Current (DC)

Chapter 10

DC NETWORK ANALYSIS

Maximum Power Transfer Theorem

 

The Maximum Power Transfer Theorem is not so much a means of analysis as it is an aid to system design. Simply stated, the maximum amount of power will be dissipated by a load resistance when that load resistance is equal to the Thevenin/Norton resistance of the network supplying the power. If the load resistance is lower or higher than the Thevenin/Norton resistance of the source network, its dissipated power will be less than maximum.

This is essentially what is aimed for in stereo system design, where speaker “impedance” is matched to amplifier “impedance” for maximum sound power output. Impedance, the overall opposition to AC and DC current, is very similar to resistance, and must be equal between source and load for the greatest amount of power to be transferred to the load. A load impedance that is too high will result in low power output. A load impedance that is too low will not only result in low power output, but possibly overheating of the amplifier due to the power dissipated in its internal (Thevenin or Norton) impedance.

Taking our Thevenin equivalent example circuit, the Maximum Power Transfer Theorem tells us that the load resistance resulting in greatest power dissipation is equal in value to the Thevenin resistance (in this case, 0.8 Ω):

With this value of load resistance, the dissipated power will be 39.2 watts:

If we were to try a lower value for the load resistance (0.5 Ω instead of 0.8 Ω, for example), our power dissipated by the load resistance would decrease:

Power dissipation increased for both the Thevenin resistance and the total circuit, but it decreased for the load resistor. Likewise, if we increase the load resistance (1.1 Ω instead of 0.8 Ω, for example), power dissipation will also be less than it was at 0.8 Ω exactly:

If you were designing a circuit for maximum power dissipation at the load resistance, this theorem would be very useful. Having reduced a network down to a Thevenin voltage and resistance (or Norton current and resistance), you simply set the load resistance equal to that Thevenin or Norton equivalent (or vice versa) to ensure maximum power dissipation at the load. Practical applications of this might include stereo amplifier design (seeking to maximize power delivered to speakers) or electric vehicle design (seeking to maximize power delivered to drive motor).

  • REVIEW:
  • The Maximum Power Transfer Theorem states that the maximum amount of power will be dissipated by a load resistance if it is equal to the Thevenin or Norton resistance of the network supplying power.  
 

 

 

 

                                                         

Share |

 

 

 

 

 

 

 

   

 

 

 

 

HOMEHOW-TO PAGESBOOK STOREFREE ESTIMATES

 

ABOUT ED THE HANDYMANCONTESTSCONTACT USLINK TO USFREE STUFF

 

 

Use of/Visit to this site constitutes the User's Understanding of and Consent to Disclaimers, Terms, Ad Disclosures & License  | Privacy Policy

All links found on this site should be considered as Ad links.  See Ad Disclosures for more details.

Protected by Copyscape Online Plagiarism Checking Tool

 Monitored for Copyright Compliance